12
be loaded to the monitoring platform via SMS command.
5.22.2 Storage upon times: Send SMS: “save0password” to the tracker unit, it will reply “save ok”,
and will store the lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour).
5.22.3 Unlimited storage
：
Send sms:”save030s***n+ password” to tracker device, it will reply “save ok”.
5.22.4: Storage Clearance: Send SMS: “clear+ password” to tracker device, it will reply “clear ok”.
5.22.5
：
Storage Volume: store about 16,000 positions, and can be copied to computer by USB data cable.
5.23. Data load
5.23.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device
is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does
not work under GPRS mode.
5.23.2
Specified date Load: Send SMS: “load+ p space+ year month date” to tracker device, it will
reply: “load ok” and load the tracking data to the monitoring platform upon the valid time you choose.
For Example: send SMS: “load123456 20110425” to the tracker device, means to load the tracking data
of 25th April 2011 to monitoring platform.
5.24 SOS Alert
Press the SOS for 3 seconds, it will send SMS “help me!+ Geo-info” to all the authorized numbers and dial all
the authorized numbers in turn . It will stop alert when any authorized number answer the call or reply SMS
“help me” to the tracker. Sound and interface all closed in the process, entry monitor mode after the authorized
number answer the call.
5.25 GPS blind Spot alert
This function deactivates as default, send SMS “gppspace+on”, it will send alert SMS
“no gps+last valid latitude/longitude before lost signal” to authorized phone numbers.
Close the function: Send SMS “gppspace+off”
5.26. Movement alert
5.26.1.Setting up
：
when the unit stays immobile in a place for 3-10 minutes with GPS signal reception, the user
can send SMS“move+pspace+0200” to the tracker (Suppose area of a radius of 200 meters, it supports
4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a movement (the default distance is
200m), it will send SMS “Move+ latitude & longitude” to the authorized numbers at 3 minutes interval.
5.26.2
Cancel: Send SMS “password” to deactivate the movement alert
5.27.Ge
o
-
fence
5.27.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS:
“spspace+latitude,longitude; latitude,longitude” to unit to set the rectangle district. In case of
breach, it will send SMS “stgeo-info” to the authorized numbers every 3 minutes.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second
latitude&longitude is the coordinate of the bottom right corner.
