Garmin GPS 500, Pilot'S Manual & Reference

Page: 20 / 256

GPS 500 Pilot’s Guide and Reference 1-12
SECTION 1
INTRODUCTION
190-00181-60 Rev. G
Changing the data fields:
1) From the Default NAV page, press the MENU
Key and select ‘Change Fields?’ (Figure 1-17).
Figure 1-17 Default NAV Page Menu
2) Turn the large right knob to select the data
field to be changed.
3) Turn the small right knob to display a list of
data options (Figure 1-18).
Figure 1-18 ‘Select Field Type’ Window
4) Press the
ENT
Key to select the desired data
item and return to the Default NAV Page.
NAV/COM Page
From the Default NAV Page, turn the small right knob
until the NAV/COM Page (Figure 1-19) is displayed.
Figure 1-19 NAV/COM Page
Frequency
Type
Departure, Enroute, or
Arrival Airport
Frequency
List
The NAV/COM Page displays the available frequencies
(communications and navigation) for the departure airport,
any enroute airports which are included in the flight plan,
and the final destination airport. When using the direct-
to function, frequencies are listed for the airport nearest to
the starting position and the destination airport.
Displaying the frequency list for the
desired flight plan or direct-to airport:
1) Press the small
right
knob to activate the
cursor on the airport identifier field (in the GPS
Window).
2) Turn the small right knob to display the list
of airports (departure, arrival, and enroute) for
the flight plan or direct-to. Continue to turn
the small
right knob until the desired airport
is selected.
3) Press the ENT Key to display the frequency list
for the selected airport.