GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. E
SECTION 5
PROCEDURES
5-15
Figure 5-40 Approach Window
DO NOT USE FOR
NAVIGATION
Billard Muni (Topeka, KS)
VOR or GPS Rwy 22
Figure 5-41 Terminal Mode
Refer to Figure 5-41 for the following steps.
3) Within 30 nm of KTOP, the GPS 400 switches
from enroute mode to terminal mode and the
CDI scale transitions from 5.0 to 1.0 nm, full
scale deflection.
4) If the approach has not yet been activated (in
step 2), do so when cleared for the approach
(Figure 5-42).
Figure 5-42 Procedures Page
5) When approaching the IAF (D258G), a waypoint
alert (‘NEXT DTK 353°’) appears in the lower
right corner of the screen (Figure 5-43). As the
distance (DIS) to the IAF approaches zero, the
alert is replaced by a turn advisory (‘TURN TO
353°’).
Figure 5-43 Waypoint Alert
6) Follow the arc; when the course select setting
and desired track differ by more than 10°, a
‘Set course to ###°’ message appears on the
Message Page.
