GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. E
SECTION 2
NAV PAGES
2-12
Automatic Zoom
The automatic zoom feature automatically adjusts
the map range from 2000 nm through each lower range,
stopping at 1.0 nm when approaching the destination
waypoint.
Enabling/disabling automatic zoom:
1) From the Map Page Menu, turn the large
right
knob to highlight ‘Setup Map?’ and press the
ENT
Key.
2) Turn the small
right
knob to select ‘Map’ and
press the
ENT
Key.
3) Turn the large
right
knob to highlight the ‘Auto
Zoom’ field.
4) Turn the small
right
knob to select ‘On’ or
‘Off’.
5) Press the
ENT
Key to accept the selected
option.
To enable/disable the wind vector, all
background land data, or all Jeppesen
aviation data:
1) From the Map Page Menu, turn the large
right
knob to highlight ‘Setup Map?’ and press the
ENT
Key.
2) Turn the small
right
knob to select ‘Map’ and
press the
ENT
Key.
3) Turn the large
right
knob to highlight the
appropriate field.
4) Turn the small
right
knob to select ‘On’ or
‘Off’.
5) Press the
ENT
Key to accept the selected
option.
Displaying airports, NAVAIDs, active flight
plan waypoints, user-created waypoints,
state/provincial boundaries, rivers/lakes,
and cities:
1) From the Map Page Menu, turn the large
right
knob to highlight ‘Setup Map?’ and press the
ENT
Key.
2) Turn the small
right
knob to select the
appropriate ‘Group’ name (per Table 2-2) and
press the
ENT
Key.
3) Turn the large
right
knob to highlight the zoom
field for the desired feature.
4) Turn the small
right
knob to select the
maximum range at which the feature should
appear on screen (or select ‘Off’ to never
display the selected feature).
5) Press the
ENT
Key to accept the selected
option.
6) Turn the large
right
knob to highlight the text
field for the desired feature.
7) Turn the small
right
knob to select the desired
text size, or select ‘None’ to disable text
descriptions.
8) Press the
ENT
Key to accept the selected
option.