GPS 400 Pilot’s Guide and Reference
190-00140-60 Rev. E
6-20
SECTION 6
WPT PAGES
User Waypoint Page Options
The following User Waypoint Page options are available
by pressing the
MENU
Key:
‘View User Waypoint List?’ displays a list of all user
waypoints currently stored in memory.
Viewing a list of all user waypoints:
1) From the User Waypoint Page, press the
MENU
Key to display the User Waypoint Page Menu.
2) Turn the large
right
knob to highlight ‘View
User Waypoint List?’ (Figure 6-45) and press
the
ENT
Key.
Figure 6-45 User Waypoint Page Menu
3) The top of the User Waypoint List indicates
the total number of user waypoints currently
used and available memory (Figure 6-46). If
more user waypoints are stored than can be
displayed on a single screen, turn the large
right
knob to scroll through the User Waypoint
List.
Figure 6-46 User Waypoint List Page
4) Press the small
right
knob to return to the
User Waypoint Page.
‘Delete User Waypoint?’ allows the pilot to delete the
selected waypoint from memory.
Deleting a user waypoint:
1) Select the desired waypoint on the User
Waypoint Page and press the
MENU
Key to
display the User Waypoint Page Menu.
2) Turn the large right knob to highlight ‘Delete
User Waypoint?’ (Figure 6-47) and press the
ENT
Key.
Figure 6-47 User Waypoint Page Menu
‘Crossfill?’ allows the pilot to transfer a user waypoint
to another 400/500-series unit (if installed). Please refer to
Sections 4.1 and 8.1 for detailed information on crossfill.
