Garmin GPS 175, Pilot'S Manual

Page: 140 / 244

3-64 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. B
Navigation
3.20 Arrivals
PAGE SPECIFIC CONTROLS
SELECT AN ARRIVAL
From the Home page:
1. Tap PROC > Arrival .
2. Confirm the selected airport. If necessary, tap Airport and choose an airport
using the provided search options.
3. Tap Arrival > Select an arrival from the list.
4. Tap Transition > Select a transition.
5. Tap Runway > Select a runway.
6. Tap Preview > Review the arrival diagram and sequence list.
7. Tap Load Arrival . The Active FPL page opens.
8. Scroll the flight plan to view all arrival waypoints.
Loading an Arrival into Flight Plan
•
Load a Standard Terminal Arrival (STAR) at any airport with a published
arrival procedure
•
Flight plans allow only one arrival procedure at a time
•
Loading an arrival when one is already present will replace the existing entry
•
Selecting an arrival, transition waypoint, and runway defines the route
Load Arrival: Loads arrival
procedure into the active flight plan.
Activate Arrival: Activates the
loaded arrival procedure.
Remove Arrival: Removes the
loaded arrival procedure.
To change or remove the arrival:
•
Tap the existing flight plan
arrival.
•
Select a different one.
OR
•
Tap Remove Arrival .