Garmin GPS 175, Pilot'S Manual

Page: 138 / 244

3-62 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. B
Navigation
3.19 Departures
FEATURE LIMITATIONS
•
Vector-only departures are not available in the Procedures database
PAGE SPECIFIC CONTROLS
SELECT A DEPARTURE
From the Home page:
1. Tap PROC > Departure .
2. Confirm the selected airport. If necessary, tap Airport and choose an airport
using the provided search options.
3. Tap Departure > Select a departure from the list.
4. Tap Transition > Select a transition.
5. Tap Runway > Select a runway.
6. Tap Preview > Review the departure diagram and sequence list.
7. Tap Load Departure . The Active FPL page opens.
8. Scroll the flight plan to view all departure waypoints.
Loading a Departure into Flight Plan
•
Always load the departure at the departure airport in the flight plan
•
Flight plans allow only one departure procedure at a time
•
Loading a departure when one is already present will replace the existing entry
•
Selecting a departure, transition waypoint, and runway defines the route
Load Departure: Loads departure
procedure into the active flight plan.
Activate Departure: Activates the
loaded departure procedure.
Remove Departure: Removes the
loaded departure procedure.
To change or remove the departure:
•
Tap the existing flight plan
departure
•
Select a different one.
OR
•
Tap Remove Departure .