Garmin GNS 530W, Pilot'S Manual & Reference

Page: 188 / 230

9 - AUX PAGES
178
for runway length and “any” for runway surface
type.
Data Field Configuration — determines the
information type that is displayed in the user-
selectable data field directly below the VLOC
window. Available data options are: VOR/LOC data
that displays VOR/Localizer information, Config
Data Fields that allow selection of a nav data item,
or a traffic watch screen (when connected to a
traffic sensor). The selected data option appears on
EVERY page.
To change the data field configuration:
1. Select “Data Field Configuration” from the
Setup 1 Page.
2. Turn the
small right
knob to display the
configuration items.
3. Turn the
small
or
large right
knob to high-
light the desired item and then press ENT .
4. If you selected “Config Data Fields”, turn the
large right knob counter-clockwise to high-
light the data field name.
5. The data field name will be highlighted. Turn
the
small right
knob to display the data field
items.
6. Turn the small or large right knob to high-
light the desired item and then press ENT .
7. Press the small right (CRSR) knob twice to
exit the selection process.
COM Configuration — allows you to select
8.33 kHz or 25.0 kHz COM frequency channel
spacing.
NOTE: 8.33 kHz VHF communication frequency channel
spacing is not approved for use in the United States.
Select the 25.0 kHz channel spacing option for use in
the United States.
CDI / Alarms
To set the airspace warning messages or change
the altitude buffer:
1. Select “CDI / Alarms” from the Setup 1 Page.
2. Turn the
large right knob to highlight the
“On”/”Off” field next to the desired airspace
type. (“MOAs & Other Airspace” includes mili-
tary operation, alert, caution, danger, training
and warning areas.)
Turn the large right knob to select the de-
sired airspace type, then turn the small right
knob to select “On” or “Off”.
3. Turn the
small right
knob to select “On” or
“Off”, as desired. Press ENT to accept the
selection.
4. To change the altitude buffer, turn the large
right knob to highlight the “Altitude Buffer”
Setup 1 Page