Garmin GNS 400W, Pilot'S Manual & Reference

Page: 87 / 220

4 - FLIGHT PLANS
77 190-00356-00 Rev G
Active Flight Plan Options
To set a parallel track to your flight plan.
1. With the Active Flight Plan Page displayed,
press MENU to display the Active Flight Plan
Page Options window.
Select “Parallel Track?” to set a parallel track
to your current flight plan.
2. Turn the large right knob to highlight “Parallel
Track?” and press ENT .
3. Turn the small and large right knobs to
set the Offset Distance value and then press
ENT .
Turn the small and large knobs to select the
parallel track distance from your current
flight plan.
4. Turn the large right knob to highlight the
Offset Direction.
5. Turn the small right knob to select the desired
Offset Direction and press
ENT
.
Turn the small and large knobs to select the
parallel track direction from your current
flight plan.
6. Activate? is highlighted. Press ENT to activate
the selected Parallel Track. Or, press CLR or the
CRSR
to cancel Parallel Track selection.
To cancel a parallel track to your flight plan.
1. With the Active Flight Plan Page displayed,
press MENU to display the Active Flight Plan
Page Options window.
2. Turn the large right knob to highlight “Parallel
Track?” and press
ENT
.
3. “Cancel?” is highlighted. Press
ENT
.
Change Fields
Change Fields? allows you to select the desired
data items to display on the active flight plan page.
1. With the Active Flight Plan Page displayed,
press MENU to display the Active Flight Plan
Page Options window.
2. Turn the large right knob to highlight
“Change Fields?” and press
ENT
. The field
active for selection will flash. Turn the large
right knob to highlight the field to change.
3. Turn the small right knob to open the list of
selections and continue turning it to highlight
the desired selection and then press
ENT .
Restore Defaults
Restore Defaults? returns the data items to fac-
tory defaults.
1. With the Active Flight Plan Page displayed,
press
MENU
to display the Active Flight Plan
Page Options window.
2. Turn the
small right
knob to highlight
“Restore Defaults?” and then press ENT .