Garmin GNS 400W, Pilot'S Manual & Reference

Page: 72 / 220

3 - DIRECT-TO
62 190-00356-00 Rev G
Selecting a Waypoint
Selecting a Direct-To Waypoint by Facility
Name or City
In addition to selecting a direct-to waypoint by
identifier, the select direct-to waypoint page also allows
you to select airports, VORs and NDBs by facility
name or city location. If duplicate entries exist for the
entered facility name or city, additional entries may be
viewed by continuing to turn the
small right knob
during the selection process.
Facility
Name
Identifier, Symbol
and Region
Flight Plan
Field
City
Nearest
Airport
Field
To select a direct-to waypoint by facility name or
city:
1. Press the
direct-to
key. The select direct-to
waypoint page will appear, with the waypoint
identifier field highlighted.
2. Turn the large right knob to highlight the
facility name (second line; see above) or the
city (third line; see above) field.
3. Use the
small
and
large right
knobs to enter
the facility name or city location of the desired
direct-to waypoint. As you spell the facility
name or city, the Spell’N’Find feature will select
the first entry in the database based upon the
characters you have entered up to that point.
4. Continue turning the small right knob to
scroll through any additional database listings
for the selected facility name or city. You can
also scroll backwards with the
small right
knob if you scroll past the desired waypoint.
5. Press ENT to confirm the selected waypoint,
and
ENT
to activate the direct-to function.
To select the direct-to waypoint by facility
name (shown above) or city location (shown
below), highlight the second or third line on
the direct-to waypoint page. Use the small and
large right knobs to enter the facility name or
city. The identifier(s) for any matching entries
will appear on the top line of the page.