Garmin GNS 400W, Pilot'S Manual & Reference

Page: 61 / 220

2 - NAV PAGES
51 190-00356-00 Rev G
NAVCOM Page
NAVCOM Page
The
NAVCOM (navigation communications) page
provides a list of the airport communication and
navigation frequencies at your departure, en route and
arrival airports. The
NAVCOM page
makes selection
of the frequencies you’ll need along your flight plan
quick and convenient. If you do not have an active
flight plan with a departure airport, the
NAVCOM page
will display the frequencies for the airport nearest
your departure position. Only the 420AW and 430AW
move frequencies to their Navcom.
Assigned Frequency
and Usage Informa-
tion (when applicable)
Departure, En
Route or Arrival
Airport
Frequency
Type
Third Page
in NAV group
To select a frequency list for a departure, en
route, or arrival airport:
1. Press the small right knob to activate the
cursor.
2. Turn the large right knob to place the cursor
on the airport identifier field (top line on the
NAVCOM page).
3. Turn the
small right
knob to select the desired
airport and press ENT .
To scroll through the list of frequencies:
1. Activate the cursor, if not already active, by
pressing the
small right
knob.
2. Turn the
large right
knob to move the cursor
through the list of frequencies. If there are more
frequencies in the list that can be displayed on
the screen, a scroll bar along the right-hand
side of the screen will indicate which part of
the list is currently being displayed.
}
scroll
bar
3. To place a frequency in the standby field of the
COM or VLOC window, highlight the desired
frequency and press
ENT
. ( 420AW and 430AW
only)