2 - NAV PAGES
46
190-00356-00 Rev G
To update the terrain or obstacle database:
1. Acquire a new terrain data card from
Garmin.
2. Turn off the power to the 400W Series unit.
3. Remove the old terrain data card from and
insert the new card into the right-most slot of
the 400W Series unit.
4. Turn on the 400W Series unit and verify that the
TERRAIN system passes the self-test. The “TER
TEST” annunciator will clear after checking and
no failure message appears.
Terrain/Obstacle Database Areas of Coverage
The following describes the area of coverage avail-
able in each database. Regional definitions may change
without notice.
Database
Coverage Area
Worldwide (WW)
Latitudes: N 75° to S 60°
Longitudes: W 180° to E 180°
United States (US)
Limited to the United States plus
some areas of Canada, Mexico,
Caribbean, and the Pacific.
US/Europe
Alaska, Austria, Belgium, Canada*,
Caribbean*, Czech Republic,
Denmark, Estonia, Finland, France,
Germany, Greece, Hawaii, Iceland,
Ireland, Italy, Latvia, Lithuania,
Mexico*, Netherlands, Norway,
Poland, Portugal, Slovakia, Spain,
Sweden, Switzerland, United
Kingdom, United States
* Indicates partial coverage
CAUTION:
Obstacles 200 feet and higher are in-
cluded in the Obstacle Database. It is very impor-
tant to note that not all obstacles are necessarily
charted and therefore may not be contained in
the Obstacle Database.
Navigation Database
It is therefore important to also have the latest
Navigation Database installed to ensure correct Terrain
alerting.
TERRAIN Alerts
TERRAIN alerts are issued when flight conditions
meet parameters that are set within the TERRAIN system
software algorithms. When an alert is issued, visual
annunciations are displayed. Annunciations appear in a
dedicated field in the lower left corner of the display.
TERRAIN Annunciation and Pop-Up
Alert
TERRAIN Annunciation Field
TERRAIN Pop-Up Alert
Pop-up Alerts
On any page except the TERRAIN Page, when a terrain
or obstacle alert is issued, a pop-up window is displayed
with the appropriate alert.
To acknowledge the pop-up alert and return to
the currently viewed page:
Press the
CLR
key.
To acknowledge the pop-up alert and quickly
display the TERRAIN Page:
Press the
ENT
key.
Terrain Operation
Summary of Contents for GNS 400W
