2 - NAV PAGES
39
190-00356-00 Rev G
Map Page Options
7. For airspace boundaries, highways, roads, rail-
road lines, wind vector, active flight plan course
lines, and lat/long grid lines: turn the
small
right
knob to select the appropriate “Group”
name (per the chart on the previous page)
and press
ENT
. Use the
large right
knob to
highlight the zoom field for the desired feature
and turn the
small right
knob to select the
maximum scale at which the feature should
appear on screen. Or select “Off” to never dis-
play the selected feature. Press
ENT
to accept
the selected option. Distance Measurements
The “Measure Dist?” option provides a quick, easy
method for determining the bearing and distance
between any two points on the map display.
To measure bearing and distance between two
points:
1. On the Nav Map page, press
MENU
. Then,
turn the
large right
knob to highlight “Mea-
sure Dist?” and press
ENT
. An on-screen refer-
ence pointer will appear on the map display at
your present position.
2. Use the
small
and
large
right
knobs to place
the reference pointer at the location you wish
to measure FROM and press
ENT
.
3. Again, use the
small
and
large
right
knobs to
place the reference pointer at the location you
wish to measure TO. The bearing and distance
from the first reference location will appear at
the top of the map display.
4. To exit the “Measure Dist?” option, press the
small right
knob.
Summary of Contents for GNS 400W
