Garmin GNS 400W, Pilot'S Manual & Reference

Page: 23 / 220

13
TAKEOFF TOUR
190-00356-00 Rev G
Default Nav Page
Default Nav Page
During most flights, the
default NAV
,
map
and
NAVCOM pages will be the primary pages used for
navigation. The default NAV page displays a graphic
course deviation indicator (CDI), the active leg of
your flight plan (as defined by the current “from” and
“to” waypoints), and six user-selectable data fields.
The default settings for these fields are distance to
waypoint (DIS), desired track (DTK), bearing to
waypoint (BRG), ground speed (GS), ground track
(TRK) and estimated time en route (ETE). See Sec-
tion 11 for definitions of these navigation terms. The
default NAV page is selected by pressing and holding
the
CLR
key or turning the
small right
knob.
Active Leg of
Flight Plan
User-
selectable
Data Fields
Course Deviation Indicator (CDI)
Default NAV Page
To change the data fields in the corners of the
Default NAV Page:
1. Press
MENU
(with the Map Page displayed).
2. Turn the large right knob to highlight
“Change Fields?” and press ENT .
3. Turn the large right knob to highlight the
data field you wish to change.
4. Turn the
small right
knob to select the type
of data you want to appear on this field and
press
ENT .
5. Press the small right knob to remove the
cursor.