9 - AUX PAGES
174
190-00356-00 Rev G
Position Format
To change the position format:
1. Select “Position Format / Map Datum” from
the Setup 1 page.
2. The flashing cursor is on the position format
field. Turn the
small right
knob to select the
desired position format. The following position
formats are available:
•
hddd°mm.mmm’
—latitude and longitude in
degrees and decimal minutes
•
hddd°mm’ss.s
”—latitude and longitude in
degrees, minutes and decimal seconds
•
MGRS
—Military Grid Reference System
•
UTM/UPS
—Universal Transverse Mercator /
Universal Polar Stereographic grids
3. Press
ENT
to accept the selected format.
Map Datum
NOTE:
Per TSO C146a, the WGS-84 map datum is
used.
Date / Time
To display local time or UTC:
1. Select “Date / Time” from the Setup 1 page.
2. The flashing cursor highlights the time format
field. Turn the
small right
knob to display a
window of available time formats: Local 12hr,
Local 24hr, or UTC.
3. Continue turning the
small right
knob to
select the desired time format.
4. Press
ENT
to accept the selection.
To set the local time:
1. Select “Date / Time” from the Setup 1 page.
2. Turn the
large right
knob to highlight the
time offset field.
3. Use the
small
and
large
right
knobs to enter
the desired offset, beginning by entering a
minus (-) or plus (+) sign to indicate whether
the offset is behind UTC or ahead of UTC. (In
Setup 1
Summary of Contents for GNS 400W
