Garmin GNS 400W, Pilot'S Manual & Reference

Page: 176 / 220

9 - AUX PAGES
166 190-00356-00 Rev G
Utility Page
To record or reset the departure time:
1. Select “Flight Timers” from the utility page.
2. Turn the
large right
knob to highlight the
reset mode field, under “Departure Time”.
(The reset mode field will indicate “Pwr-on”
or “GS>30kt”.)
3. Turn the
small right
knob to select the desired
reset mode. (“Pwr-on” will record a departure
time when the 400W-series unit is turned on.
“GS>30kt” will record a departure time once
the GPS-computed ground speed exceeds 30
knots.)
In the case of a helicopter installation, the
Departure Criteria is “Pwr-on” or “In-air.”
4. Press ENT when finished.
5. To reset the departure time, turn the
large
right knob to highlight “Reset?” and press
ENT .
To view, use or reset total trip time:
1. Select “Flight Timers” from the utility page.
2. Turn the
large right
knob to highlight the
reset mode field, under “Total Trip Time”.
(The reset mode field will indicate “Pwr-on”
or “GS>30kt”.)
3. Turn the small right knob to select the
desired reset mode. (“Pwr-on” will record trip
time, in hours/minutes/seconds, any time the
400W-series unit is turned on. “GS>30kt” will
record trip time any time the GPS-computed
ground speed exceeds 30 knots.)
In the case of a helicopter installation, the Total
Trip Criteria is “Pwr-on” or “In-air.”
4. Press ENT when finished.
5. To reset the total trip time, turn the large right
knob to highlight “Reset?” and press ENT .
Trip Statistics
To reset trip statistics readouts:
1. Select “Trip Statistics” from the utility page.
2. Press MENU to display an options window
with several reset options:
• Reset Trip?— Resets trip odometer and average
ground speed readouts
• Reset Max Speed?— Resets maximum speed
readout only