Garmin GNS 400W, Pilot'S Manual & Reference, Page: 171 / 220

9 - AUX PAGES
161 190-00356-00 Rev G
Flight Planning
knobs to enter the identifier of the desired user
waypoint. Press
ENT
when finished.
6. The flashing cursor moves to the “CROSS-SIDE”
field. Turn the small right knob to select “To”
or “From” and press
ENT
.
7. The flashing cursor moves to the “Initiate
Transfer?” confirmation field. Press ENT to
transfer the selected data.
Scheduler
To enter a scheduled message:
1. Select “Scheduler” from the flight planning
page.
2. The flashing cursor highlights the first message
field. If necessary, turn the
large right
knob
to highlight the first blank message field.
3. Use the small and large right knobs to enter
the message text. Press ENT when finished.
(The 400W-series unit will store up to nine
scheduled messages holding 20 characters
each.)
4. The flashing cursor moves to the type field
under the new message. Turn the small right
knob to display a window of available options:
(Event, One Time, Periodic). Press
ENT to
select.
5. The flashing cursor moves to the time/date
field. Use the
small
and
large right
knobs to
set the time or date required before the mes-
sage is displayed. Time is entered as hours/min-
utes (hhh:mm). Event-based messages expire
at a specific date and time. Press
ENT
, when
finished.
To edit a scheduled message:
1. Select “Scheduler” from the flight planning
page.
2. The flashing cursor highlights the first message
field.
3. To edit the message text, turn the large right
knob to highlight the desired message field. Use
the
small
and
large right
knobs to edit the
message text—entering the new text directly over
the old message. Press
ENT when finished.