Garmin GNS 400W, Pilot'S Manual & Reference

Page: 170 / 220

9 - AUX PAGES
160 190-00356-00 Rev G
Flight Planning
To transfer flight plans or user waypoints to/from
a second 400W (or 500W) Series unit:
1. While viewing the default Nav page, Flight
Plan Catalog, Active Flight Plan page, User
Waypoint page,
or the User Waypoint page by
pressing MENU , scrolling down to “Crossfill” with
the large right knob and then pressing ENT .
On the Aux Flight Planning page scroll down to
“Crossfill” with the
large right knob, and then
press ENT .
2. Turn the large right knob to highlight the
Method field. Turn the
small right
knob to
select “Auto” or “Manual”. “Auto” automati-
cally transfers any selection of (or any change
to) a direct-to destination or active flight
plan, including VNAV parameters, to a second
400W/500W-Series Garmin unit.
NOTE:
Crossfill requires both 400W and/or 500W
series units to have the same Jeppesen NavData
®
database cycle number.
3. The flashing cursor highlights the transfer data
option (TRANSFER) field. Turn the small right
knob to display a window of available data
options:
• Active Flight Plan —transfers the active flight
plan, including VNAV parameters, to/from a
second 400W-Series (or 500W-Series) Garmin
unit in a dual unit installation. This option is
the default when selecting “Crossfill” from the
default Nav Page. Active Flight Plan informa-
tion is automatically transferred between units
when the “Auto” method is selected above.
• Flight Plan —transfers any stored flight
plan to/from a second 400W-Series (or
500W-Series) unit, by selecting the flight plan
by number. This option is the default when
selecting “Crossfill” from the Flight Plan Cata-
log.
• User Waypoints (all) —transfer all
stored user waypoints to/from a second
400W/500W-series unit.
• User Waypoint —transfer the specified user
waypoint to a second 400W/500W-series
unit.
4. Continue turning the small right knob to
highlight the desired data option. Press
ENT
select the highlighted option.
5a. For a stored flight plan (“Flight Plan” data
option), the flight plan number field is high-
lighted. Turn the
small right
knob to select
the desired flight plan and press ENT .
OR
5b. For a specified user waypoint (“User Waypoint”
data option), the waypoint identifier field is
highlighted. Use the
small
and
large right