manualshive.com logo in svg

Garmin GNC 420, Pilot'S Manual & Reference

The Garmin GNC 420 is a cutting-edge aviation navigation system. With its comprehensive Quick Reference manual, pilots can effortlessly access vital information on-the-go. Experience hassle-free downloading of this manual for free from our website, ensuring you have the knowledge you need for seamless navigation.

Share
Download
background image

GNC 420(A) Pilot’s Guide and Reference

SECTION 3 

NAV PAGES

3-10

190-00140-20  Rev. K

Map Setup

Many  of  the  GNC  420’s  functions  are  menu  driven.  

Each  of  the  main  pages  has  an  options  menu,  allowing  

customization of the page to the pilot’s preferences and/or 

selection of special features which specifically relate to that 

page.  A Map Page Menu (Figure 3-16) provides additional 
settings to customize the Map Page and additional features 
related specifically to the Map Page.

Displaying the Map Page Menu:

 

Press  the 

MENU

  Key  with  the  Map  Page 

displayed (Figure 3-16).

Figure 3-16  Map Page Menu

The  following  options  are  available:  ‘Setup  Map?’, 

‘Measure Dist?’, ‘Data Fields Off?’, ‘Change Fields?’, and 
‘Restore Defaults?’.

‘Setup Map?’ allows configuration of the Map Display 

to  individual  preferences,  including  map  orientation, 
land  data  enable/disable,  Jeppesen  data  enable/disable, 

automatic zoom, airspace boundaries, and text size.

 

NOTe:  Large, medium, and small classifications 
are used on the GNC 420 for airports and cities.  
Large airports are those with a runway longer 
than 8100 feet.  Medium airports include those 
with  a  runway  longer  than  5000  feet  or  with 
a  control  tower.    Large  cities  are  those  with 
approximate populations greater than 200,000 
and medium cities with greater than 50,000.

Table 3-4 lists the settings available for each group:

Group

Available Settings

Map

Orientation, AutoZoom, Land Data, 
Aviation Data

Weather

Lightning Mode/Symbol  
(when applicable)

Traffic

Traffic Mode/Symbol/Label  
(when applicable)

Airport

Large/Medium/Small Airports and 
Text

NAVAID

VORs, NDBs, Intersections, and Text

Waypoint

User Waypoints, Waypoint Text, 
Flight Plan Wpts

Line

Active Flight Plan, Lat/Long 

Control

Controlled Airspace: Class B, C, D 
(tower zone)

Airspace

Special-Use Airspace: Restricted, 
MOA, Other

City

Large/Medium/Small Cities and Text

Road

Freeway, National Highway, Local 
Hwy, Local Road

Other

States/Prov, Rivers/Lakes, Railroads, 
Wind Vector

Table 3-4

For most entries in Table 3-4, on, off, and range are the 

available selections for display of each information type.

Summary of Contents for GNC 420



































































































































































































































































Reviews:

No comments

Related manuals for GNC 420

Flight Data Systems FDS 400-301 Operator'S Manual preview
FDS 400-301
Brand: Flight Data Systems Pages: 61
Igloo EWA 500.P User Manual preview
EWA 500.P
Brand: Igloo Pages: 48
Lincat SCH1085 User And Installation Instructions Manual preview
SCH1085
Brand: Lincat Pages: 12
ViewSonic TD2240 User Manual preview
TD2240
Brand: ViewSonic Pages: 26
Satloc G4 Connectivity Kit Quick Start Manual preview
G4 Connectivity Kit
Brand: Satloc Pages: 6
freor JUPITER H8 Operation Manual preview
JUPITER H8
Brand: freor Pages: 44
uAvionix AV-30-E Installation Manual preview
AV-30-E
Brand: uAvionix Pages: 54
Ideal AKE BAK G-53 User Manual preview
BAK G-53
Brand: Ideal AKE Pages: 75
Garmin GTN 6XX System Maintenance Manual preview
GTN 6XX
Brand: Garmin Pages: 142
Tecfrigo SNELLE 400 GBT Installation And Use Manual preview
SNELLE 400 GBT
Brand: Tecfrigo Pages: 60
Tecfrigo FrostEmily PRISMA 200 Installation And Use Manual preview
FrostEmily PRISMA 200
Brand: Tecfrigo Pages: 60
TQ AirPlus 100 KRT2 Series User & Installation Manual preview
AirPlus 100 KRT2 Series
Brand: TQ Pages: 67
Skytrac 101-200-01 Installation Manual preview
101-200-01
Brand: Skytrac Pages: 50
Dynon D180 FlightDEK Reference Manual preview
D180 FlightDEK
Brand: Dynon Pages: 20
Dynon Avionics EFIS-D10A User Manual preview
EFIS-D10A
Brand: Dynon Avionics Pages: 72
Dynon Avionics SkyView HDX Airplane Flight Manual Supplement preview
SkyView HDX
Brand: Dynon Avionics Pages: 88
Dynon Avionics SkyView SE Pilot'S User Manual preview
SkyView SE
Brand: Dynon Avionics Pages: 92
Dynon Avionics SkyView HDX Series Maintenance Manual preview
SkyView HDX Series
Brand: Dynon Avionics Pages: 128

Brands by name

Popular brands

Load more brands