Garmin GNC 420 Page 248 Pilot'S Manual & Reference Download

Page: 248 / 258

GNC 420(A) Pilot’s Guide and Reference

APPENDIX C

TROUBLESHOOTING

C-4

When should I use the OBS key to return to
auto sequencing, and what happens when I do?

The most common application for using the

OBS

Key

is the missed approach. The GNC 420 suspends automatic

waypoint sequencing (indicated by a ‘SUSP’ annunciation

directly above the

OBS

Key; see Figure C-4) when the

aircraft crosses the

missed approach point (MAP). This

prevents the GNC 420 from automatically sequencing
to the missed approach

holding point (MAHP). If a

missed approach is required, press the

OBS

Key to return

to automatic waypoint sequencing and sequence the

approach to the MAHP. See Section 6.2, Flying the Missed
Approach for more information on missed approaches.

Figure C-4 ‘SUSP’ Annunciation

Why won’t my unit automatically sequence to
the next waypoint?

The GNC 420 only sequences flight plan waypoints

when automatic sequencing is enabled (i.e., no ‘OBS’ or

‘

SUSP’ annunciation directly above the

OBS

Key). For

automatic sequencing to occur, the aircraft must also cross
the bisector of the turn being navigated. The bisector is

a perpendicular line between two flight plan legs which

crosses through the waypoint common to both legs.

How do I skip a waypoint in an approach,
departure, or arrival?

The GNC 420 allows the pilot to manually select any

approach, departure, or arrival leg as the active leg of the

flight plan. This procedure is performed from the Active
Flight Plan Page by highlighting the desired waypoint and

pressing the

Direct-to

Key twice, then press the

ENT

Key to approve the selection (Figure C-5). The GPS then
provides navigation along the selected flight plan leg, so
be sure to have clearance to that position. See Section 5.2,
Shortcuts for more information.

Figure C-5 Activate Leg Window

How do I fly the GPS with an autopilot and
heading indicator heading bug?

If the installation does not have an HSI, the pilot

should make the course selections on the external CDI’s
OBS knob and the heading indicator heading bug.

190-00140-20 Rev. K

Summary of Contents for GNC 420



































































































































































































































































Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands

Garmin GNC 420, Pilot'S Manual & Reference

Search results

Summary of Contents for GNC 420

Reviews:

Related manuals for GNC 420

Brands by name

Popular brands