Garmin GNC 420, Pilot'S Manual & Reference

Page: 162 / 258

GNC 420(A) Pilot’s Guide and Reference 9-14
SECTION 9
AUX PAGES
Utility Page: Checklists
Creating a checklist:
1) Select ‘Checklist’ from the Utility Page (Figure
9-33), using the steps described at the
beginning of this section (9.3). Press the
ENT
Key to display a list of checklists.
Figure 9-33 Checklists Highlighted
2) Press the
MENU
Key to display an options
menu. Turn the large right knob to select
‘Create New Checklist?’ and press the ENT
Key.
3) Use the small and large
right
knobs to enter
the name of a checklist. Press the
ENT
Key
when finished. (Up to nine different checklists
can be created and stored in the GNC 420.)
4) Use the small and large right knobs to enter
each checklist item, followed each time by the
ENT Key. Each checklist may contain up to 30
line items of as much as 16 characters long.
Executing a checklist:
1) With the Checklists Page displayed (Figure
9-34), turn the large right knob to select the
desired checklist and press the
ENT
Key.
Figure 9-34 Desired Checklist Highlighted
2) As each checklist item is completed, press the
ENT
Key to move to the next item on the list
(Figure 9-35).
Figure 9-35 Desired Checklist Item Highlighted
Editing a checklist:
1) With the Checklists Page displayed, turn the
large
right
knob to select the desired checklist
and press the ENT Key.
2) Press the MENU Key to display an options
menu. Select ‘Edit Item?’ and press the ENT
Key, then use the small and large
right
knobs
to edit each checklist item. Press the ENT Key
when finished.
190-00140-20 Rev. K