Garmin GMA 350c, Pilot'S Manual

Page: 33 / 33

190-01134-12 Rev. K
Garmin GMA 350/350c Pilot’s Guide 38
GMA 350/350c Audio Panel
BLUETOOTH
®
RECORDING MODE
Bluetooth
®
Recording Mode enables the option to record pilot
headphone audio to a Bluetooth ® recording device, such as an action
camera, personal digital audio recorder, or a smart phone or tablet
app. Bluetooth
®
Recording Mode takes all audio routed to the pilot’s
headphones (such as radio, music and intercom audio) and also outputs
that audio to a paired Bluetooth
®
device. Bluetooth
®
Recording Mode
requires a device that supports HFP.
To enable Bluetooth ® Recording Mode, first connect the Bluetooth ®
digital recorder to the GMA. Then press the PILOT key and the small
knob simultaneously. The PILOT annunciator will turn blue to indicate
Bluetooth
® Recording Mode is enabled, and the audio clip “
Bluetooth
Recording Mode Enabled ” will play.
This setting is persistent. Once enabled for a device, the GMA will
automatically enable Bluetooth
®
Recording Mode for future connections
to that device (until disabled). The same process for enabling Bluetooth ®
Recording Mode is used for disabling it. When disabled, the audio clip
“
Bluetooth Recording Mode Disabled ” will play.
NOTE:
When connected to a Garmin VIRB X, Bluetooth Recording Mode
will always be enabled (does not require manual enabling).
FAIL-SAFE OPERATION
If there is a failure of the GMA 350/350c or when power is not applied, a
fail-safe circuit connects the pilot’s headset and microphone directly to the
COM1 transceiver. Audio is not available on the speaker during Fail-safe
operation.