GFL
™
10 Installation and Configuration Instructions
Use the Garmin
®
GFL 10 adapter to adapt analog information provided by a fluid-level sensor
on your boat to your NMEA 2000
®
network. The GFL 10 adapter allows you to observe
fluid-level information on compatible Garmin display devices connected to your NMEA 2000
network. For a list of compatible Garmin chartplotters and devices, visit
.
Compare the contents of this package with the packing list on the box. If any pieces are
missing, contact your Garmin dealer immediately.
Product Registration
Help us better support you by completing our online registration today. Go to
. Keep the original sales receipt, or a photocopy, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while using your GFL 10 adapter. In
the USA, go to
www.garmin.com/support
, or contact Garmin USA by phone at (913) 397.8200
or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to
www.garmin.com/support
and click
Contact Support
for in-country support
information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
See the
Important Safety and Product Information
guide in the compatible Garmin display device box for
product warnings and other important information.
Caution:
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or
sanding.
notiCe:
When drilling or cutting, always check the opposite side of the drilling or cutting
surface.
Needed Tools and Supplies
Heat-shrink tubing and a heat gun
Cable ties
Additional NMEA 2000 cabling and connectors (optional)
•
•
•
July 2009
190-01081-06 Rev. A
Printed in Taiwan