Garmin G500H, Pilot'S Manual, Page: 259 / 366

4-109
190-01150-02 Rev. J Garmin G500H Pilot’s Guide
For
ewor
d
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazar
d
Avoidance
Sec 5
Additional
Featur
es
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary
Appendix A
Appendix B
Index
4.9.5 NEXRAD Weather Setup
1) While viewing the FIS-B weather page, press the
Menu
key.
2) With the Weather Setup selection highlighted, press ENT .
4.9.5.1 Weather Page Map Orientation
The Orientation option sets the orientation of the Wx Data Link Map pages.
1) While viewing the FIS-B Weather Map 1, 2, or 3 of the Wx page group, press
the
MENU
key. With “Weather Setup” highlighted, press
ENT
.
2) With the “Map Orientation” option active, turn the small MFD knob to change
the highlighted value.
Figure 4-89 Weather Page Map Orientation
3) Press ENT to accept the displayed value. The next option will be highlighted.
4) Press the small
MFD
knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
4.9.5.2 NEXRAD Data Viewing Range
The NEXRAD Viewing Range option allows you to select the map range
where at and below the selected value NEXRAD weather products will be shown
on the selected MFD FIS-B Weather Map page (1, 2, or 3). When Off is selected,
NEXRAD weather data will not be shown. Where a value (such as 250 NM) is
selected, NEXRAD data will be shown at map ranges of that value (250 NM)
and lower.
1) While viewing a FIS-B Weather Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. The cursor flashes on the
“Weather Setup” option. Press
ENT
.
2) The NEXRAD Data Viewing Range value will be highlighted. Turn the small
MFD knob to highlight the desired value.
3) Press
ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small
MFD
knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.