Garmin G500, Pilot'S Manual

Page: 88 / 440

1-60 Pilot’s Guide 190-01717-10 Rev. H
System Description
1.29.1 Exporting to SD Card
NOTE
Do not eject the SD card while the export function is in progress. Wait until
the
Export Data Log key is available before ejecting the card.
Exportable parameters are dependent on aircraft type.
1. Insert an SD card into top/left slot.
2. Power on GDU.
3. Go to the Logs page.
4. Tap Export Data Log .
During export, the Export Data Log key is
unavailable (gray). It becomes available once
export is complete.
Export in Progress
What if I forget to insert my SD card
before flight?
Internal flight and engine data logging occurs
regardless of whether an SD card is present.
After your flight, you may insert a card and
download log files using the
Export Data Log
command.
With the aircraft safely on ground:
1. Power off unit.
2. Insert card.
3. Power on unit.
4. Tap System > Logs > Export Data Log .
Wait for the export to complete before
ejecting the SD card.
Once the files are exported
onto SD card, you may
transfer the log files to your
personal logbook on
flyGarmin.com .
Duration varies
depending on the
number of files present.
For lengthy transfers, it
may be necessary to run
the engine or operate
on ground power until
the export is complete.