Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
70
Flight instruments
sY
stem
O
Ver
Vie
W
Flight
instruments
eis
Au
D
iO P
A
nel
& C
ns
Flight
m
A
n
Agement
hAZA
rD
AV
O
iD
A
n
Ce
AFC
s
ADD
iti
O
n
A
l
Fe
Atures
APP
en
D
iC
es
in
D
eX
The barometric pressure setting is displayed below the Altimeter in inches of mercury (in Hg) or hectopascals
(hPa) when metric units are selected. Adjusting the altimeter barometric setting creates discontinuities in VNV
vertical deviation, moving the descent path. For large adjustments, it may take several minutes for the aircraft
to re-establish on the descent path. If the change is made while nearing a waypoint with a VNV Target Altitude,
the aircraft may not re-establish on the descent path in time to meet the vertical constraint.
Selecting the altimeter barometric pressure setting:
Turn the
BARO
Knob to select the desired setting.
Selecting standard barometric pressure:
Press the
BARO
Knob to select standard pressure; STD BARO is displayed in the Barometric Setting box.
Figure 2-11 Standard Barometric Altimeter Setting
Changing altimeter barometric pressure setting units:
1)
Select the
PFD Settings
Softkey to display the second-level softkeys.
2)
Select the
Altitude Units
Softkey.
3)
Select the
IN
Softkey to display the barometric pressure setting in inches of mercury (in Hg).
Or
, select the
HPA
Softkey to display the barometric pressure setting in hectopascals (hPa; see Figure 2-10).
4)
Select the
Back
Softkey to return to the top-level softkeys.
This manual downloaded from http://www.manualowl.com
