Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO & CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
570
Appendix A
fliGHt PlAn iMPort/eXPort MessAGes
In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/export
Results
Description
‘Flight plan successfully
imported.’
A flight plan file stored on the SD card was successfully imported as a stored flight plan.
‘File contained user waypoints
only. User waypoints imported
successfully. No stored flight
plan data was modified.’
The file stored on the SD card did not contain a flight plan, only user waypoints. These waypoints
have been saved to the system user waypoints. No flight plans stored in the system have been
modified.
‘No flight plan files found to
import.’
The SD card contains no flight plan data.
‘Flight plan import failed.’
Flight plan data was not successfully imported from the SD card.
‘Flight plan partially imported.’
Some flight plan waypoints were successfully imported from the SD card, however others had
errors and were not imported. A partial stored flight plan now exists in the system.
‘File contained user waypoints
only.’
The file stored on the SD card did not contain a flight plan, only user waypoints. In addition, one
or more of these waypoints may not have imported successfully.
‘Too many points. Flight plan
truncated.’
The flight plan on the SD card contains more waypoints than the system can support. The flight
plan was imported with as many waypoints as possible.
‘Some waypoints not loaded.
Waypoints locked.’
The flight plan on the SD card contains one or more waypoints the system cannot find in the
navigation database. The flight plan has been imported, but must be edited within the system
before it can be activated for use.
‘User waypoint database full.
Not all loaded.’
The flight plan file on the SD card contains user waypoints. The quantity of stored user waypoints
has exceeded system capacity, therefore not all the user waypoints on the SD card have been
imported. Any flight plan user waypoints that were not imported are locked in the flight plan.
The flight plan must be edited within the system before it can be activated for use.
‘One or more user waypoints
renamed.’
One or more imported user waypoints were renamed when imported due to naming conflicts with
waypoints already existing in the system.
‘Flight plan successfully
exported.’
The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’
The stored flight plan was not successfully exported to the SD card. The SD card may not have
sufficient available memory or the card may have been removed prematurely.
creW Profile iMPort/eXPort MessAGes
Crew Profile Import/export
Results
Description
‘No crew profile plan files
found to import.’
Displayed if the SD card does not have one or more valid crew profile filenames.
‘Overwrite existing profile?’
Displayed if the profile name matches the name of existing profile.
‘Profile name invalid. Enter a
different profile name.’
Displayed if the profile name is invalid.
This manual downloaded from http://www.manualowl.com
