Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A
92
Flight instruments
sY
stem
O
Ver
Vie
W
Flight
instruments
eis
Au
D
iO P
A
nel
& C
ns
Flight
m
A
n
Agement
hAZA
rD
AV
O
iD
A
n
Ce
AFC
s
ADD
iti
O
n
A
l
Fe
Atures
APP
en
D
iC
es
in
D
eX
Figure 2-36 SVT on the Primary Flight Display
Flight Path
Marker
(FPM)
Wind
Vector
ZERO PITCH LINE
The Zero Pitch Line is drawn completely across the display and represents the horizon when the terrain
horizon is difficult to distinguish from other terrain being displayed. It may not align with the terrain
horizon, particularly when the terrain is mountainous or when the aircraft is flown at high altitudes.
HORIZON HEADING
The Horizon Heading is synchronized with the HSI and shows approximately 60 degrees of compass
heading in 30-degree increments on the Zero Pitch Line. Horizon Heading tick marks and digits appearing
on the zero pitch line are not visible behind either the airspeed or altitude display. Horizon Heading is used
for general heading awareness, and is activated and deactivated by pressing the
Horizon Heading
Softkey.
TRAFFIC
WARNING:
Intruder aircraft at or below 500 ft. AGL may not appear on the SVT display or may appear as a
partial symbol.
Traffic symbols are displayed in their approximate locations as determined by the related traffic systems.
Traffic symbols are displayed in three dimensions, appearing larger as they are getting closer, and smaller
when they are further away. Traffic within 250 feet laterally of the aircraft will not be displayed on the SVT
display. Traffic symbols and coloring are consistent with that used for traffic displayed in the Inset map or
MFD traffic page. If the traffic altitude is unknown, the traffic will not be displayed on the SVT display. For
more details refer to the traffic system discussion in the Hazard Avoidance section.
This manual downloaded from http://www.manualowl.com
