Garmin G1000 Series, Pilot'S Manual

Page: 95 / 338

190-00592-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40
3-19
NAV/COM
NRST – Nearest Frequencies Page
The Nearest Frequencies Page displays a list of nearest
ARTCC, FSS and WX frequencies. For the purpose of fre-
quency selection, the selection cursor can be activated on
the ARTCC, FSS, or WX box by using the
ARTCC , FSS ,
or WX softkeys, respectively.
To view a nearest ARTCC frequency and load
it into the standby frequency field:
1. Press the ARTCC softkey to activate the selec-
tion cursor in the Nearest ARTCC box.
2. Turn the small FMS knob to scroll through the
list of ARTCC names, then the
large FMS
knob
to highlight the desired ARTCC frequency.
3. Press the
ENT
key to load the desired ARTCC
frequency into the tuning box.
NOTE: The Nearest ARTCC box contains a num-
bered list of ARTCC names as well as associated
bearing and distance information.
To view a nearest FSS frequency and load it
into the standby frequency field:
1. Press the
FSS
softkey to activate the selection
cursor in the Nearest FSS box.
2. Turn the
small FMS
knob to scroll through the
list of FSS names, then the large FMS knob to
highlight the desired FSS frequency.
3. Press the ENT key to load the desired FSS
frequency into the tuning box.
NOTE: The Nearest FSS box contains a numbered
list of FSS names as well as associated bearing
and distance information.
To view a nearest WX frequency and load it
into the standby frequency field:
1. Press the WX softkey to activate the selection
cursor in the Nearest WX box.
2. Turn the
FMS
knob to highlight the desired WX
frequency.
3. Press the
ENT
key to load the desired WX fre-
quency into the tuning box.
Figure 3-32 NRST – Nearest Frequencies Page