Garmin G1000 Series, Pilot'S Manual

Page: 66 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-38
PRIMARY FLIGHT DISPLAY
Remove Departure, Arrival, or Approach
Remove Departure, Arrival, or Approach deletes the
current standard instrument departure (SID), terminal ar-
rival route (STAR), or selected approach from the active
flight plan.
To remove a departure, an arrival, or an
approach from a direct-to or active flight
plan:
1. From the Flight Plan Window, press the
MENU
key to display the page menu options.
2. Turn the
FMS
knob to highlight ‘Remove Depar-
ture’, ‘Remove Arrival’, or ‘Remove Approach’,
then press the
ENT key. A confirmation window
appears listing the procedure that is about to
be removed, with ‘OK’ highlighted.
3. Press the
ENT
key to remove the procedure.
4. To cancel, turn the
large FMS
knob to highlight
‘CANCEL’, then press the ENT key.
Closest Point of FPL
Closest Point of FPL calculates the bearing and clos-
est distance at which a flight plan passes from a refer-
ence waypoint. It may also be used to create a new user
waypoint along the flight plan at the location closest to a
chosen reference waypoint.
Figure 2-61 Closest Point of FPL Window
To determine the closest point along the
active flight plan to a selected waypoint:
1. From the Flight Plan Window, press the MENU
key to display the page menu options.
2. Turn the
FMS
knob to highlight ‘Closest Point
of FPL’, then press the ENT key. A window
appears with the reference waypoint field
highlighted.
3. Turn the FMS knobs to enter the identifier of the
reference waypoint, then press the
ENT
key. The
G1000 displays the bearing (BRG) and distance
(DIS) to the closest point along the flight plan,
from the selected reference waypoint.
4. To create a user waypoint at this location and
add it to the flight plan, press the
ENT
key. The
name for the new user waypoint is derived from
the identifier or the reference waypoint.
Change Fields
Change Fields allows the pilot to select the desired
data items to be displayed on the Flight Plan Window.
The user-selectable data fields can be changed to display
the following information:
• Cumulative Distance (CUM)
• Distance (DIS)
• Desired Track (DTK)
• En route Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time En route (ETE)