Garmin G1000 Series, Pilot'S Manual, Page: 64 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-36
PRIMARY FLIGHT DISPLAY
Load Departure
Load Departure allows the pilot to select a published
standard instrument departure (SID) for the departure
airport, or replace the current departure with a new selec-
tion. When using a direct-to, the G1000 uses the nearest
airport as a reference when displaying available depar-
tures.
NOTE
:
The
PROC
key can also be used to load a
departure, an approach, or an arrival.
To select a departure for the departure
airport:
1. From the Flight Plan Window , press the
MENU
key to display the page menu options.
2. Turn the FMS knob to highlight ‘Load Depar-
ture’, then press the ENT key. A window
appears listing the available departures for the
departure airport.
Figure 2-57 Departure
3. Turn the
FMS
knob to select the desired depar-
ture, then press the ENT key.
4. A window may appear listing runways for the
departure. Turn the
FMS
knob to select the
desired runway, then press the ENT key. The
transition window is now displayed.
Figure 2-58 Departure Runway
NOTE: The runway window is not displayed for
every arrival. ‘ALL’ may appear in the runway
field, indicating that the arrival procedure applies
to all runways. For airports with parallel runways,
‘B’ may appear at the end of the runway designa-
tion to indicate that the arrival procedure applies
to both runways.
5. Turn the FMS knob to select the desired transi-
tion waypoint, then press the
ENT
key.
Figure 2-59 Departure Transition
6. With ‘LOAD?’ highlighted, press the ENT key.
Figure 2-60 Select Departure Window