Garmin G1000 Series, Pilot'S Manual

Page: 56 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-28
PRIMARY FLIGHT DISPLAY
WORKING WITH MENUS
NOTE:
Pressing a softkey does not display a menu
or sub-menu.
Much G1000 operation is accomplished using a menu
interface. The G1000 has a bezel-mounted dedicated
MENU key that displays a context-sensitive list of op-
tions when pressed. This option list allows the pilot to
access additional features or make setting changes specifi-
cally relating to the currently displayed window. There
is no all-encompassing menu. Some menus provide ac-
cess to additional sub-menus that are in turn used to view,
edit, select, and review options.
Figure 2-44 Page Menu Examples
No Options
with NRST
Window
Displayed
Options with
FPL Window
Displayed
To navigate the Page Menu Window:
1. Turn the FMS knob to scroll through a list of
available options (a scroll bar always appears
to the right of the window when the option
list is longer than the window).
2. Press the ENT key to select the desired
option.
3. The CLR key or the FMS knob may be pressed to
remove the menu and cancel the operation.
AUXILIARY WINDOWS
The lower right area of the PFD is a shared area that, at
any one time, can present the following windows:
• TIMER/REFERENCES
• NEAREST
• DIRECT-TO
• FLIGHT PLAN
• PROCEDURES
Timer/References Window
NOTE: Refer to the Aircraft Flight Manual (AFM)
for limitations.
The Timer/References Window is enabled and disabled
by pressing the TMR/REF softkey. The Generic Timer
and Vspeed references are set using this window.
Figure 2-45 Timer/References Window
The following Vspeeds and Vspeed bugs can be set us-
ing the Timer/References Window:
• Best glide speed reference
• Best glide speed bug (ON, OFF)
• Rotation speed reference (V
R
)
• V
R
bug (ON, OFF)
• Best angle-of-climb speed reference (V
X
)
• V
X
bug (ON, OFF)
• Best rate-of-climb speed reference (V
Y
)
• V
Y
bug (ON, OFF)