Garmin G1000 Series, Pilot'S Manual

Page: 52 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-24
PRIMARY FLIGHT DISPLAY
2.6 SUPPLEMENTAL FLIGHT DATA
OUTSIDE AIR TEMPERATURE BOX
The outside air temperature (OAT) is displayed in °C
with the “OAT” label. °F can be displayed using the AUX
System Setup Page on the MFD (refer to the Multi Func-
tion Display section).
Figure 2-40 Outside Air Temperature Box
SYSTEM TIME BOX
The System Time box displays the local time. Time
and date are obtained from the satellites and cannot be
changed. The pilot may select the desired time format
and offset. There are three time formats available: Local
12-hr, Local 24-hr, and Coordinated Universal Time
(UTC). The Time Offset (Time Zone) represents the num-
ber of hours plus or minus UTC (refer to the Multi Func-
tion Display section).
Figure 2-41 System Time Box
INSET MAP
NOTE: The Inset Map orientation is always
the same as that for the MFD Navigation Map
Page.
NOTE: Map orientation and other map features
are enabled on the MFD (refer to the Multi Func-
tion Display section).
NOTE:
Refer to the Multi Function Display sec-
tion for a detailed explanation of the declutter
levels.
The Inset Map is a smaller version of the MFD Naviga-
tion Map Page. It appears in the lower left corner of the
PFD and is displayed by pressing the
INSET softkey. The
map disappears from the PFD when pitch e30° or
–20° or when a 65° bank angle is reached. The direct-to
function is not available from the Inset Map. The fuel
reserve rings are enabled and disabled from the MFD only.
The Inset Map displays the following information:
• Moving map with orientation references
– North Up
– Track Up
– DTK Up
– HDG Up
• Zoom range legend
• Declutter levels (3)
• Aircraft icon
• Traffic data
• Topographic data
• Terrain data
• Weather information (optional)
• Enabled map features
• Active navigation route
• Track vector
• Fuel ring (reserve)