Garmin G1000 Series, Pilot'S Manual, Page: 50 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 2-22
PRIMARY FLIGHT DISPLAY
2.5 COMMUNICATION,
NAVIGATION, & SURVEILLANCE
COMMUNICATION FREQUENCY WINDOW
The Communication (COM) Frequency Window,
located in the upper right corner of the PFD, provides
control and display of dual VHF Radio Communication
Transceivers (COM1 and COM2). The COM Frequency
Window displays the following information:
• COM1 and COM2 active and standby frequencies
• Color-coded indication of the active COM transceiver
NOTE: Operating procedures for the COM Fre-
quency Window are located in the NAV/COM
section.
NAVIGATION FREQUENCY WINDOW
The Navigation (NAV) Frequency Window, located in
the upper left corner of the PFD, provides control and
display of dual VOR/ILS receivers (NAV1 and NAV2). The
NAV Frequency window displays the following informa-
tion:
• NAV1 and NAV2 active and standby frequencies
• NAV1 and NAV2 identifier, if the active NAV1 or
NAV2 frequency is a valid, identified frequency
• Color-coded indication of the active NAV receiver
NOTE: Operating procedures for the NAV Frequency
Window are located in the NAV/COM section.
Figure 2-35 Communication Frequency Window
Frequency
Tuning Box
Frequency
Toggle Arrow
COM Radios
Active COM
Frequency Field
Selected COM
Radio
(Green)
Standby COM
Frequency Field
Figure 2-36 Navigation Frequency Window
Frequency
Tuning Box
Frequency
Toggle Arrow
NAV Receivers
Active NAV
Frequency Field
Standby NAV
Frequency Field
Selected NAV
Receiver
(Green)