Garmin G1000 Series, Pilot'S Manual, Page: 176 / 338

Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A 7-42
MULTI FUNCTION DISPLAY
Store Flight Plan
Whenever an approach, departure or arrival is loaded
into the active flight plan, a set of approach, departure
or arrival waypoints is inserted into the flight plan along
with a header line describing the instrument procedure
the pilot selected. The original enroute portion of the
flight plan remains active (unless an instrument procedure
is activated) which may be done when the procedure is
loaded or at a later time. Flight plans can also be stored
with an approach, departure or arrival. The active flight
plan is erased when the system is turned off and overwrit-
ten when another flight plan is activated.
When storing flight plans with an approach, departure
or arrival, the G1000 uses the waypoint information from
the current database to define the waypoints. If the da-
tabase is changed or updated, the G1000 automatically
updates the information if the procedure has not been
modified. If an approach, departure or arrival procedure
is no longer available, the procedure is deleted from the
flight plan and an alert is displayed.
To store an existing flight plan:
1. From the Flight Plan Page, press the FMS knob
to activate the cursor.
2. Turn the large FMS knob to highlight the
desired flight plan and press the
MENU
key to
display the Flight Plan Page options.
3. Turn the
large FMS
knob to highlight ‘Store
Flight Plan’ and press the ENT key. The flight
plan is stored in the next available position in
the flight plan list on the Flight Plan Catalog
Page.
4. With ‘OK’ highlighted, press the ENT key to
store the flight plan.
Figure 7-29 Store Flight Plan Confirmation