Garmin G1000 NXi, Reference Manual

Page: 185 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
159
Additional Features
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
6)
Press the
ENT
Key or
Check
Softkey to check the selected checklist item. The
line item turns green and a checkmark is placed in the associated box. The
next line item is automatically selected for checking.
Either
FMS
Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the
CLR
Key or
Uncheck
Softkey to remove a check mark from an item.
7)
When all checklist items have been checked, ‘*Checklist Finished*’ is
displayed in green text at the bottom left of the checklist window. If all
items in the checklist have not be checked, ‘*CHECKLIST NOT FINISHED*’
will be displayed in yellow text.
8) Press the ENT Key. ‘GO TO NEXT CHECKLIST?’ will be highlighted by the
cursor.
9) Press the ENT Key to advance to the next checklist.
10)
Press the
EXIT
Softkey to exit the Checklist Page and return to the page
last viewed.
Immediately Accessing Emergency Procedures
1)
From any page on the MFD, press the
Checklist
Softkey or turn the large
FMS
Knob to select the Checklist Page.
2)
Press the
Emergency
Softkey.
3) Turn the FMS Knob to select the desired emergency checklist and press the
ENT
Key.
4) Press the ENT Key or Check Softkey to check the selected emergency
checklist item. The line item turns green and a checkmark is placed in the
box next to it. The next line item is automatically highlighted for checking.
Either
FMS
Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the
CLR
Key or
Uncheck
Softkey to remove a check mark from an
item.
5)
When all checklist items have been checked, ‘*Checklist Finished*’ is
displayed in green text at the bottom left of the checklist window. If all
items in the checklist have not be checked, ‘*CHECKLIST NOT FINISHED*’
will be displayed in yellow text.