Garmin G1000 NXi, Reference Manual, Page: 112 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
86
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
3)
Select a different arrival, if desired.
a)
Turn the large
FMS
Knob to highlight the arrival. The arrival is
previewed on the map.
b)
Turn the small
FMS
Knob to view the available arrivals. Press the
ENT
Key to select the arrival. The cursor moves to the ‘Transition’ Box (only
if there are available transitions). The arrival is previewed on the map.
c)
Turn the small
FMS
Knob to view the available transitions. Press the
ENT
Key to select the transition. The cursor moves to the ‘Runway’
Box. The arrival is previewed on the map.
d)
Turn the small
FMS
Knob to view the available runways. Press the
ENT
Key to select the runway. The cursor moves to the ‘Sequence’ Box. The
arrival is previewed on the map.
4) Press the MENU Key to display the Arrival Information ‘Page Menu’
Window.
5) Turn the FMS Knob to highlight ‘Load Arrival’.
6)
Press the
ENT
Key to load the arrival procedure into the active flight plan.
LOADING AN ARRIVAL PROCEDURE INTO A STORED FLIGHT PLAN
1) Select a stored flight plan from the ‘FPL - Flight Plan Catalog’ Page.
2)
Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’, and
press the ENT Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
3)
Press the
LD STAR
Softkey; or press the
MENU
Key, select “Load Arrival”,
and press the ENT Key. The ‘PROC - Arrival Loading’ Page is displayed.
4)
Select an arrival. Press the
ENT
Key.
5)
Select a transition for the selected arrival. Press the
ENT
Key.
6)
Select a runway served by the selected arrival, if required. Press the
ENT
Key.
7)
Press the
ENT
Key to load the selected arrival procedure.
REMOVING AN ARRIVAL FROM THE ACTIVE FLIGHT PLAN
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the
MENU
Key, and highlight ‘Remove Arrival’.