Garmin G1000 NXi, Reference Manual

Page: 109 / 260

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III 190-02178-02 Rev. A
83
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN USING THE PROC
KEY
1) Press the PROC Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Departure’.
3)
Press the
ENT
Key. The ‘PROC - Departure Loading’ Page is displayed.
4)
Use the FMS Knob to select an airport and press the ENT Key.
5) Select a departure from the list and press the ENT Key.
6) Select a runway (if required) and press the ENT Key.
7)
Select a transition (if required) and press the
ENT
Key. ‘Load?’ is
highlighted.
8)
Press the
ENT
Key to load the departure procedure.
LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN FROM THE ‘WPT -
DEPARTURE INFORMATION’ PAGE
1)
From the ‘WPT - Airport Information’ Page (first page in the ‘WPT’ Page Group), press
the
DP
Softkey. The ‘WPT - Departure Information’ Page is displayed, defaulting to the
airport displayed on the ‘WPT - Airport information’ Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter
an identifier/facility name/city, and press the
ENT
Key.
3)
Select a different departure, if desired.
a)
Turn the large FMS Knob to highlight the Departure. The departure is
previewed on the map.
b)
Turn the small FMS Knob to view the available departures. Press the
ENT
Key to select the departure. The cursor moves to the ‘Runway’
Box. The departure is previewed on the map.
c)
Turn the small
FMS
Knob to view the available runways. Press the
ENT
Key to select the runway. The cursor moves to the ‘Transition’ Box (only
if there are available transitions). The departure is previewed on the
map.
d) Turn the small FMS Knob to view the available transitions. Press the
ENT Key to select the transition. The cursor moves to the ‘Sequence’
Box. The departure is previewed on the map.
4) Press the MENU Key to display the ‘Page Menu’ Window.