190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
34
SYSTEM OVERVIEW
SYSTEM UTILITIES
For flight planning purposes, timers, trip statistics, and a scheduler feature are provided on the ‘Aux - Utility’
Page. The timers available include a stopwatch-like generic timer, a total time in flight timer, and a record of the
time of departure. Trip statistics—odometer, trip odometer, and average trip and maximum groundspeeds—are
displayed from the time of the last reset.
Figure 1-17 ‘Aux - Utility’ Page
TIMERS
The system timers available on the ‘Aux - Utility’ Page include:
»
Stopwatch-like generic timers
»
Total-time-in-flight timer
»
Time since departure
The generic timer can be set to count up or down from a specified time (HH:MM:SS). When the countdown
on the timer reaches zero the digits begin to count up from zero. If the timer is reset before reaching zero on
a countdown, the digits are reset to the initial value. If the timer is counting up when reset, the digits return
to zero.
Setting the generic timer:
1)
Use the
FMS
Knob to select the ‘Aux - Utility’ Page.
2)
Push the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the small
FMS
Knob to select the timer counting direction (Up/Dn) and press the
ENT
Key.
