190-01895-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA62
499
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
The ChartView time critical information can also be found on the AUX - System Status page. The database
CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow
text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is
shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing.
The
SHW CHRT
Softkey label then appears subdued and is disabled until a revised issue of ChartView is
installed.
NOTE
:
A subdued softkey label indicates the function is disabled.
Select the
MFD1 DB
Softkey to place the cursor in the DATABASE window. Scroll through the listed
information by turning the
FMS
Knob or pressing the
ENT
Key until the ChartView database information is
shown.
The ChartView database cycle number shown in the figure, 1403, is deciphered as follows:
14 – Indicates the year 2014
03 – Indicates the third issue of the ChartView database for the year
The EXPIRES date 17–FEB–14 is the date that this database should be replaced with the next issue.
The DISABLES date 28–APR–14 is the date that this database becomes inoperative.
Figure 8-47 AUX – System Status Page, ChartView Current and Available
ChartView
Data
The ChartView database is provided directly from Jeppesen. Refer to Updating Jeppesen Databases in
Appendix B for instructions on revising the ChartView database.
