Garmin G1000 Pilot’s Guide for the Diamond DA62
190-01895-00 Rev. A
240
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
HSI Annunciation
Description
Example on HSI
LNAV
RNAV GPS approach using published LNAV
minima
Approach Service Level
- LNAV, LNAV+V, L/VNAV, LP, LP+V, LPV
LNAV+V
RNAV GPS approach using published LNAV
minima. Advisory vertical guidance is provided
L/VNAV
(available only if
SBAS available)
RNAV GPS approach using published LNAV/
VNAV minima (downgrades to LNAV if SBAS
unavailable)
LP
(available only if
SBAS available)
RNAV GPS approach using published LP minima
(downgrades to LNAV if SBAS unavailable)
LP+V
(available only if
SBAS available)
RNAV GPS approach using published LP minima
Advisory vertical guidance is provided
(downgrades to LNAV if SBAS unavailable)
LPV
(available only if
SBAS available)
RNAV GPS approach using published LPV
minima
Table 5-9 Approach Types
LOADING AN APPROACH INTO THE ACTIVE FLIGHT PLAN
Loading an approach into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The Procedures Window is displayed.
2)
Highlight ‘SELECT APPROACH’, and press the
ENT
Key. The Approach Loading Page is displayed.
3)
Select the airport and approach:
a)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
b)
Select an approach from the list and press the
ENT
Key.
Or:
a)
If necessary, push the
FMS
Knob to exit the approach list, and use the large
FMS
Knob to move the cursor to
the APPROACH CHANNEL field.
b)
Use the
FMS
Knob to enter the approach channel number, and press the
ENT
Key to accept the approach
channel number. The airport and approach are selected.
4)
Select a transition (if required) and press the
ENT
Key.
5)
Minimums
a)
To set ‘MINIMUMS’, turn the small
FMS
Knob to select ‘BARO’ or ‘TEMP COMP’ or ‘RAD ALT’, and press the
ENT
Key. Turn the small
FMS
Knob to select the altitude, and press the
ENT
Key.
b)
If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the small
FMS
Knob to select the
temperature, and press the
ENT
Key.
Or
:
