Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Stereo Buttons and Status LEDs
Because this device is designed to be installed in a location that may not be easily accessible, almost all
playback and device interaction is done through a network-connected remote control, stereo, or chartplotter. In
some instances, you may need to watch the LEDs or press the buttons on the device itself.
Stereo Buttons
Press to turn on the stereo.
Press and hold for two seconds to turn off the stereo.
Press and hold for ten seconds to reset the stereo.
Press to make the stereo discoverable to BLUETOOTH
®
devices.
and
Press and hold both buttons together for ten seconds to revert the stereo to factory settings.
Status LEDs
Icon
LED Activity
LED Status
Solid
The stereo is receiving power.
Blinking
The stereo is turning on.
Solid
The stereo is on and operating normally.
Off
The stereo is off.
Blinking
The stereo is communicating using Ethernet.
Blinking
The stereo is discoverable to BLUETOOTH devices.
Solid
The stereo is connected to a BLUETOOTH device.
Getting Started
1