Garmin FUSION Apollo MS-WB670, Owner'S Manual, Page: 35 / 44

Setting a Static IP Address
If the stereo is configured as a static IP, it is automatically assigned the IP address of 192.168.0.1. You can
change this IP address.
If the stereo is a DHCP client on the network and you do not want the DHCP server to automatically assign an
IP address to the stereo, you can set a static IP address.
NOTE: Every device on the network must have a unique IP address. If you select a static IP address that is the
same as the IP address on the network, the devices will not work properly.
1 Select > SETTINGS .
2 Select the name of the stereo.
3 Select NETWORK > STATIC IP .
4 Select an option:
• To set the IP address, select
IP , and enter the IP address.
• To set the subnet mask, select MASK , and enter the subnet mask.
NOTE: The subnet mask must match all other devices on the network to work properly. A typical subnet
mask is 255.255.255.0.
• To set the default gateway IP address, select GATEWAY , and enter the gateway IP address.
NOTE: The default gateway is typically set as the IP address of the DHCP server on the network.
5 Select SAVE .
DHCP Settings
Select > SETTINGS , then select NETWORK > ADVANCED > DHCP SERVER .
DHCP ENABLED : Sets the device as the DHCP server on the network.
START IP : Sets the first IP address in the IP-address range of the DHCP server.
END IP : Sets the final IP address in the IP-address range of the DHCP server.
Configuring the Stereo for use with a Garmin Marine Network
You can connect this stereo to a Garmin Marine Network in order to view and control the stereo using a
compatible Garmin chartplotter.
NOTE: When you configure the stereo for use with a Garmin Marine Network, you are limited to using only
Garmin and Fusion devices. You may not be able to use third-party routers, storage devices, or other network
products with this stereo directly.
When the stereo is connected to a Garmin Marine Network, you can connect a smartphone to a wireless
access point on a connected Garmin chartplotter and use the Fusion-Link app to control the stereo.
1 Select > SETTINGS .
2 Select the name of the stereo.
3 Select NETWORK > GARMIN MARINE NETWORK .
Resetting Network Settings
You can reset all network settings for this stereo to the factory default values.
1 Select > SETTINGS .
2 Select the name of the stereo.
3 Select NETWORK > ADVANCED > RESET > YES .
General Settings 29