Maintaining Individual Zone Volume Levels
If you adjust the volume levels of individual zones so that some zones are louder than others, the individual
zone volume settings are all affected when you adjust the volume for ALL zones. By default, if you adjust the
volume for ALL to 00, this sets of the volume levels for all zones to 00 and resets all individual zone volume
adjustments. You can enable the KEEP VOLUME RATIOS option to retain individual zone volume adjustments
when you adjust the volume for ALL to 00.
NOTE:
This setting applies to volume adjustments on the stereo or a connected ERX400 remote control only. If
you adjust the volume on the stereo using a connected chartplotter or NRX remote control, the volume levels
will still be reset.
TIP:
For the best results when enabling this setting, you should set the power-on volume limit on the home zone
stereo to 24. See the stereo Owner's Manual for more information.
1
Select
>
SETTINGS
.
2
Select the name of the remote control.
3
Select
KEEP VOLUME RATIOS
.
Turning Off Devices on the Network
You can turn off this remote control and home zone stereo or you can turn off all devices connected to the
network.
1
Hold .
2
Select an option:
• Select
TURN OFF
to turn off this remote control and its assigned home zone stereo.
• Select
ALL OFF
to turn off all devices connected to the network.
Fusion PartyBus Networking
The Fusion PartyBus networking feature allows you to connect multiple compatible stereos together on a
network, using a combination of wired or wireless connections.
You can group a compatible stereo, such as the Apollo RA670 stereo, with other compatible stereos connected
to the network. Grouped stereos can share available sources and control media playback on all of the stereos in
the group, which allows for a synchronized audio experience across the vessel. You can quickly create, edit,
and break up groups as needed from any compatible stereo or remote control on the network.
You can use compatible stereos and remote controls, whether they are grouped or not, to adjust the volume of
the available speaker zones for any stereo on the network.
You should refer to the installation instructions provided with your remote control when constructing the Fusion
PartyBus network.
Creating a Group
Before you can create a group, you must connect multiple compatible stereos to the Fusion PartyBus network.
See the installation instructions provided with your stereo for information about installing and configuring the
network.
NOTE:
There are some limitations and other considerations when using stereos in groups. See
for more information.
1
Select
>
GROUPS
.
TIP:
You can hold
from any screen to open the GROUPS menu.
2
Select the name of the stereo you want to be the primary stereo in the group.
3
Select the stereos you want to add to the group.
4
Select
DONE
.
From the source screen, you can select a source from any stereo in the group except a zone stereo, such as
the Apollo SRX400 stereo or any sources that are disabled for use on the Fusion PartyBus network.
6
Fusion PartyBus Networking
Summary of Contents for Fusion Apollo MS-ERX400
Page 1: ...FUSION Apollo MS ERX400 O W N E R S M A N U A L ENGLISH...
Page 4: ......
Page 19: ......
