Garmin FORERUNNER 935, Owner'S Manual

Page: 31 / 46

6
Select an option:
• Select
Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
7
If necessary, select the type of alert.
8
Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
9
If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1
Hold .
2
Select Settings > Activities & Apps .
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap .
6 Select an option:
• Select
Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on ( System Settings , page 26 ).
If necessary, you can customize the data pages to display
additional lap data ( Customizing the Data Screens , page 24 ).
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1 Hold .
2 Select Settings > Activities & Apps .
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap > Lap Alert .
6
Select a data field to change it.
7
Select Preview (optional).
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1
Hold .
2
Select Settings > Activities & Apps .
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Pause .
6
Select an option:
• To pause the timer automatically when you stop moving,
select When Stopped .
• To pause the timer automatically when your pace or
speed drops below a specified level, select Custom .
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1
Hold .
2
Select Settings > Activities & Apps .
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Climb > Status > On .
6
Select an option:
• Select
Run Screen to identify which data screen appears
while running.
• Select Climb Screen to identify which data screen
appears while climbing.
• Select Invert Colors to reverse the display colors when
changing modes.
• Select Vertical Speed to set the rate of ascent over time.
• Select Mode Switch to set how quickly the device
changes modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1
Hold .
2
Select Settings > Activities & Apps .
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Scroll .
6
Select a display speed.
Changing the GPS Setting
By default, the device uses GPS to locate satellites. For more
information about GPS, go to www.garmin.com/aboutGPS .
1
Hold .
2 Select Settings > Activities & Apps .
3 Select the activity to customize.
4
Select the activity settings.
5
Select GPS .
6
Select an option:
• Select
Normal (GPS Only) to enable the default GPS
satellite system.
• Select GPS + GLONASS (Russian satellite system) for
more accurate position information in situations with poor
sky visibility.
• Select GPS + GALILEO (European Union satellite
system) for more accurate position information in
situations with poor sky visibility.
• Select UltraTrac to record track points and sensor data
less frequently ( UltraTrac , page 26 )
NOTE: Using GPS and another satellite together can reduce
battery life more quickly than using GPS only ( GPS and
Other Satellite Systems , page 26 ).
Customizing Your Device 25