Garmin Forerunner 50, Owner'S Manual

Page: 19 / 44

Forerunner 50 Owner’s Manual
t
raIn
m
ode
Training Settings
nOTE: Training settings
cannot be modified during
an active session in Train
mode.
1. On the Train page, press and
hold start/stop .
2. Press view to advance to the
next setting. The following
settings can be modified:
UNITS –change units to
miles or kilometers.
PACE SHOW –display
pace in minutes per mile/
kilometer.
OR
SPEED SHOW –display
speed in miles/kilometers
per hour.
•
•
AUTO –turn Auto Lap
®
on
or off. When AUTO lap
is ON , laps are triggered
by distance; you cannot
use the lap button to
manually mark laps Press
view again to enter the
distance.
ZONES –turn the training
zones on or off. See
Training Zones.
PUSH CALIB –calibrate
the foot pod by running a
known distance, see
page 8 .
TxPAIR –see page 18 .
CALIB –enter a calibration
factor to adjust foot pod
calibration to a known
value. See page 8 .
WHEEL –enter the wheel
circumference in mm
(GSC 10 required).
•
•
•
•
•
•