Garmin Fishfinder 340C Owner'S Manual Download Page 7

Page: 7 / 56

Fishﬁnder 340C Owner’s Manual

ETTING

TARTED

ACKING

IST

AND

PTIONAL

CCESSORIES

ETTING

TARTED

Before installing and using your Fishﬁnder 340C, check to see that

your package includes the following items. The package number

is on the outside of the box. If any parts are missing, contact your

Garmin dealer immediately.

Packing List

Standard Package (010-00505-00)

•   Fishﬁnder 340C unit
•   Tilt/swivel mount
•   6-foot data/power cable
•   Owner’s manual
•  Quick reference guide
•  Flush mount template
•   Protective cover
•   Flush mount hardware kit

Optional Package (010-00505-01)

• Standard package
• Dual beam (14°/45°) plastic trolling motor/transom mount

transducer with depth and temperature and an attached

30-foot cable

Optional Package (010-00505-02)

• Standard package
• Dual frequency (200/50kHz) plastic transom mount

transducer with depth and temperature and an attached

30-foot cable

Optional Package (010-00505-03 with Worldwide

Language Support)

• Standard package
• Dual frequency (200/50kHz) plastic transom mount

transducer with depth and temperature and an attached

30-foot cable

Optional Accessories

The following optional accessories are available at

www.garmin.com:

•   Speed sensors
•  Quick-release ﬂush mount kit
•  CANet

™

connection kit

• Optional transducers and transducer accessories

Summary of Contents for Fishfinder 340C

























































Search results

Summary of Contents for Fishfinder 340C

Reviews:

Related manuals for Fishfinder 340C

Brands by name

Popular brands

Garmin Fishfinder 340C, Owner'S Manual

Search results

Summary of Contents for Fishfinder 340C

Reviews:

Related manuals for Fishfinder 340C

Brands by name

Popular brands