eTrex H Owner’s Manual
G
ettInG
S
tarted
Installing Batteries and Lanyard
The eTrex operates on two AA batteries (not
included). You can use Alkaline or NiMH batteries.
Battery
compartment
Lockng
pn slot
To install the batteries:
1. Remove the battery cover by turning the
Locking ring counter-clockwise and pulling out.
2. Insert the batteries, observing the proper
polarity.
Remove the batteries if the unit is not being used for
several months. Stored data is not lost when batteries
are removed.
To install the lanyard:
1. Remove the battery cover and place the loop of
the lanyard through the slot in the base of the
unit.
2. Route the strap through the loop, and pull tight.
Lanyard installation
Summary of Contents for eTrex eTrex
Page 1: ...eTrex H Owner s Manual personal navigator ...
Page 31: ......
