Garmin ENDURO, Manual

Page: 17 / 54

13
A csoport követés használatát segítő tippek
A csoport követés az élő követés funkció segítségével a csoportba tartozó
többi ismerős helyzetének a térképen történő megjelenítését teszi lehető-
vé. A csoportba tartozó összes ismerősnek ismerősnek kell lennie a Garmin
Connect fiókunkban.
• Szabadtéren, GPS-vétel mellett folytassuk a tevékenységet.
• Bluetooth-kapcsolaton keresztül párosítsuk az Enduro készüléket okos te-
le fonunkkal.
• A Garmin Connect alkalmazás beállítási menüjében a Connections
(Kap-
csolatok) pontra kattintva frissítsük a csoport követési (GroupTrack) me-
netbe tartozó ismerősök listáját.
• Ellenőrizzük, hogy a csatlakozó ismerősök mindegyike párosítsa
okostelefonját, és a Garmin Connect alkalmazásban indítson el egy élő
követés menetet.
• Ellenőrizzük, hogy az összes csatlakozó ismerős hatósugáron belül le-
gyen (40 km-en belül).
• Csoport követési menet alatt váltsunk a térkép képernyőre, ugyanis itt lát-
hatjuk a kapcsolódó ismerősök helyzetét ( „Térkép hozzáadása az egyes
tevékenységekhez”; 32. oldal ).
Csoport követés beállítások
Nyomjuk le hosszan a MENU gombot, majd válasszuk a Biztonság és köve-
tés > Csoport követés
pontot.
Megjelenítés térképen: Csoport követés közben a térképen megtekinthet-
jük az ismerőseinket.
Tevékenység típusok: Kiválaszthatjuk, mely tevékenység típusok jelenje-
nek meg a térképen Csoport követés közben.
Connect IQ funkciók
A Connect IQ alkalmazáson keresztül a Garmintól vagy más külső fejlesztőtől
származó Connect IQ bővítményeket adhatunk a készülékhez. Óra számlap-
okkal, adatmezőkkel, widgetekkel, alkalmazásokkal bővíthetjük a készüléket.
Óra számlapok: egyedi megjelenést adhatunk az órának.
Adatmezők: olyan új adattípusokkal bővíthetjük a készüléket, melyek a mé-
rők által közölt adatokat, a végzett tevékenységet, illetve a napló tartal-
mát teljes új szemszögből mutatják be. A Connect IQ adatmezőket a gyári
funkciókhoz és képernyőkhöz gond nélkül hozzárendelhetjük.
Widgetek: információs ablakok, melyek révén egyetlen pillantással tájéko-
zódhatunk a mérési adatokról, értesítésekről.
Alkalmazások: interaktív funkciókkal bővítik az órát, pl. új szabadtéri és
sport tevékenységek.
Connect IQ funkciók letöltése
Amennyiben a Connect IQ funkciókat a Connect IQ alkalmazáson ke-
resztül kívánjuk letölteni, először párosítsuk a készüléket egy kompatibilis
okostelefonnal ( „Okostelefon és a készülék párosítása”; 2. oldal ).
1.
Okostelefonunkon az alkalmazás áruházból telepítsük és lépjünk be a
Connect IQ alkalmazásba.
2. Amennyiben szükséges, válasszuk ki a készüléket.
3. Válasszuk ki a Connect IQ funkciót.
4. Kövessük a képernyőn megjelenő utasításokat.
Connect IQ funkciók letöltése számítógépről
1. USB-kábellel csatlakoztassuk a készüléket a számítógéphez.
2. Lépjünk fel az apps.garmin.com oldalra és lépjünk be fiókunkba.
3. Válasszuk ki a kívánt Connect IQ funkciót, és töltsük le.
4. Kövessük a képernyőn megjelenő utasításokat.
Garmin Pay
A Garmin Pay funkció lehetővé teszi, hogy az órát a közreműködő áruházak-
ban, üzletekben közreműködő pénzügyi intézménytől származó bankkártya
vagy hitelkártya használatával fizessünk.
Garmin Pay pénztárca beállítása
Garmin Pay pénztárcánkhoz egy vagy több közreműködő hitel- vagy bank-
kártyát adhatunk hozzá. A garmin.com/garminpay/banks oldalon megtalál-
hatjuk a közreműködő pénzügyi intézmények listáját.
1. A Garmin Connect alkalmazásban válasszuk a
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1 From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices
>
Add Device
, and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1 Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3 Place the bike mount on the bike stem.
4 Attach the bike mount securely using the two bands
Á
.
5 Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range ( Edge Specifications , page 10 ).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
vagy
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1 From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices
>
Add Device
, and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1 Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3 Place the bike mount on the bike stem.
4 Attach the bike mount securely using the two bands
Á
.
5 Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range ( Edge Specifications , page 10 ).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
pontot.
2. Válasszuk a Garmin Pay > Pénztárca létrehozása pontot.
3. Kövessük a képernyőn megjelenő utasításokat.
Fizetés óra segítségével
Mielőtt az óránkkal fizethetnénk, meg kell adnunk legalább egy fizetési lehe-
tőséget (kártyát).
Óránkkal a közreműködő üzletekben fizethetünk.
1. Nyomjuk le hosszan a LIGHT gombot.
2. Válasszuk a
Tips for GroupTrack Sessions
The GroupTrack feature allows you to keep track of other
connections in your group using LiveTrack directly on the
screen. All members of the group must be your connections in
your Garmin Connect account.
• Start your activity outside using GPS.
• Pair your Enduro device with your smartphone using
Bluetooth technology.
• In the Garmin Connect app, from the settings menu, select
Connections to update the list of connections for your
GroupTrack session.
• Make sure all of your connections pair to their smartphones
and start a LiveTrack session in the Garmin Connect app.
• Make sure all your connections are in range (40 km or
25 mi.).
• During a GroupTrack session, scroll to the map to view your
connections (
Adding a Map to an Activity
, page 32 ).
GroupTrack Settings
Hold MENU , and select Safety & Tracking > GroupTrack .
Show on Map : Enables you to view connections on the map
screen during a GroupTrack session.
Activity Types : Allows you to select which activity types appear
on the map screen during a GroupTrack session.
Connect IQ Features
You can add Connect IQ features to your watch from Garmin
and other providers using the Connect IQ app. You can
customize your device with watch faces, data fields, widgets,
and device apps.
Watch Faces : Allow you to customize the appearance of the
clock.
Data Fields : Allow you to download new data fields that present
sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Widgets : Provide information at a glance, including sensor data
and notifications.
Device Apps : Add interactive features to your watch, such as
new outdoor and fitness activity types.
Downloading Connect IQ Features
Before you can download features from the Connect IQ app, you
must pair your Enduro device with your smartphone (
Pairing
Your Smartphone
, page 2 ).
1
From the app store on your smartphone, install and open the
Connect IQ app.
2
If necessary, select your device.
3
Select a Connect IQ feature.
4
Follow the on-screen instructions.
Downloading Connect IQ Features Using
Your Computer
1
Connect the device to your computer using a USB cable.
2
Go to apps.garmin.com , and sign in.
3
Select a Connect IQ feature, and download it.
4
Follow the on-screen instructions.
Garmin Pay
The Garmin Pay feature allows you to use your watch to pay for
purchases in participating stores using credit or debit cards from
a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit cards to
your Garmin Pay wallet. Go to garmin.com/garminpay/banks to
find participating financial institutions.
1
From the Garmin Connect app, select or .
2
Select Garmin Pay > Get Started .
3
Follow the on-screen instructions.
Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases, you must
set up at least one payment card.
You can use your watch to pay for purchases in a participating
store.
1
Hold LIGHT .
2
Select .
3
Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times,
your wallet locks, and you must reset your passcode in the
Garmin Connect app.
Your most recently used payment card appears.
4
If you have added multiple cards to your Garmin Pay wallet,
select DOWN to change to another card (optional).
5
Within 60 seconds, hold your watch near the payment reader,
with the watch facing the reader.
The watch vibrates and displays a check mark when it is
finished communicating with the reader.
6
If necessary, follow the instructions on the card reader to
complete the transaction.
TIP: After you successfully enter your passcode, you can make
payments without a passcode for 24 hours while you continue to
wear your watch. If you remove the watch from your wrist or
disable heart rate monitoring, you must enter the passcode
again before making a payment.
Adding a Card to Your Garmin Pay Wallet
You can add up to 10 credit or debit cards to your Garmin Pay
wallet.
1
From the Garmin Connect app, select or .
2
Select Garmin Pay > > Add Card .
3
Follow the on-screen instructions.
After the card is added, you can select the card on your watch
when you make a payment.
Managing Your Garmin Pay Cards
You can temporarily suspend or delete a card.
NOTE: In some countries, participating financial institutions may
restrict the Garmin Pay features.
1
From the Garmin Connect app, select or .
2
Select Garmin Pay .
3
Select a card.
4
Select an option:
• To temporarily suspend or unsuspend the card, select
Suspend Card
.
The card must be active to make purchases using your
Enduro device.
• To delete the card, select .
Changing Your Garmin Pay Passcode
You must know your current passcode to change it. If you forget
your passcode, you must reset the Garmin Pay feature for your
Enduro device, create a new passcode, and reenter your card
information.
Connect IQ Features 13
ikont.
3. Adjuk meg a négyszámjegyű jelszavunkat.
MEGJEGYZÉS! Ha a négy szám jegyű jelszót háromszor tévesen ütjük
be, a pénztárca zárolja magát, és a jelszót a Garmin Connect alkalmazás-
ban újra be kell állítanunk.
A legutóbb használt kártyánk jelenik meg.
4.
Ha több kártyát rendeltünk hozzá a Garmin Pay pénztárcához, a
DOWN
gomb segítségével egy másik kártyára válthatunk (nem kötelező).
5. 60 másodpercen belül tartsuk az órát a kártyaolvasóhoz közel úgy, hogy
a felső része az olvasó felé irányul.
Az óra rezeg és egy pipát jelenít meg, amikor sikeresen befejeződött az
olvasóval való kommunikáció.
6.
Szükség esetén kövessük a kártyaolvasón lévő utasításokat a tranzakció
befejezéséhez.
TIPP! Miután sikeresen beütöttük a jelszót, 24 óráig jelszó megadása nélkül
fizethetünk az órával, amíg az a csuklónkon van. Ha az órát levesszük vagy
kikapcsoljuk a pulzusmérést, fizetés előtt ismét meg kell adnunk a jelszót.
Kártya hozzáadása a Garmin Pay pénztárcához
Maximum tíz kártyát adhatunk hozzá a Garmin Pay pénztárcánkhoz.
1. A Garmin Connect alkalmazásban válasszuk a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect ™ Mobile app,
instead of from the Bluetooth settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2 Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices > Add Device , and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2 Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6 Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1 Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range (
Edge Specifications
, page 10 ).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
vagy
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect ™ Mobile app,
instead of from the Bluetooth settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2 Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices > Add Device , and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2 Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6 Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1 Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range (
Edge Specifications
, page 10 ).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
pontot.
2. Válasszuk a Garmin Pay > Kártya hozzáadása pontot.
3. Kövessük a képernyőn megjelenő utasításokat.
Miután a kártyát hozzáadtuk, az órával való fizetéskor a hozzáadott kártyát
jelölhetjük meg fizetőeszközként.
GarminPay pénztárca kezelése
Részletes információkat tekinthetünk meg a kártyáinkról, illetve
felfüggeszthetjük, aktiválhatjuk vagy törölhetjük is azokat. A teljes Garmin
Pay pénztárcát is felfüggeszthetjük vagy kitörölhetjük.
MEGJEGYZÉS! Egyes országokban előfordulhat, hogy a közreműködő
pénzügyi intézmények korlátozzák a pénztárca funkcióit.
1. A Garmin Connect alkalmazásban válasszuk a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1 From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices > Add Device , and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1 Turn the Edge clockwise to unlock the device.
2 Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range ( Edge Specifications , page 10 ).
1 Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
vagy
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1 From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP: You can hold , and select Phone > Status > Pair
Phone to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices > Add Device , and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1 Turn the Edge clockwise to unlock the device.
2 Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when outside the approved
temperature range ( Edge Specifications , page 10 ).
1 Pull up the weather cap
À
from the USB port
Á
.
Introduction 1
pontot.
2.
Válasszuk a
Garmin Pay
pontot.
2. Válasszunk az alábbi lehetőségek közül:
• Adott kártya felfüggesztéséhez válasszuk a Felfüggeszt pontot.
Az Enduro készülékkel való fizetéshez a kártyának aktívnak kell lennie.
• Adott kártya törléséhez válasszuk a
Data Fields : Allow you to download new data fields that present
sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Widgets : Provide information at a glance, including sensor data
and notifications.
Apps : Add interactive features to your watch, such as new
outdoor and fitness activity types.
Downloading Connect IQ Features
Before you can download features from the Connect IQ app, you
must pair your Descent Mk2i device with your smartphone
(
Pairing Your Smartphone
, page 2 ).
1
From the app store on your smartphone, install and open the
Connect IQ app.
2
If necessary, select your device.
3
Select a Connect IQ feature.
4
Follow the on-screen instructions.
Downloading Connect IQ Features Using
Your Computer
1
Connect the device to your computer using a USB cable.
2
Go to apps.garmin.com , and sign in.
3
Select a Connect IQ feature, and download it.
4
Follow the on-screen instructions.
Garmin Pay
The Garmin Pay feature allows you to use your watch to pay for
purchases in participating stores using credit or debit cards from
a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit cards to
your Garmin Pay wallet. Go to garmin.com/garminpay/banks to
find participating financial institutions.
1
From the Garmin Connect app, select or .
2
Select Garmin Pay > Get Started .
3
Follow the on-screen instructions.
Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases, you must
set up at least one payment card.
You can use your watch to pay for purchases in a participating
store.
1
Hold LIGHT .
2
Select .
3
Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times,
your wallet locks, and you must reset your passcode in the
Garmin Connect app.
Your most recently used payment card appears.
4
If you have added multiple cards to your Garmin Pay wallet,
select DOWN to change to another card (optional).
5
Within 60 seconds, hold your watch near the payment reader,
with the watch facing the reader.
The watch vibrates and displays a check mark when it is
finished communicating with the reader.
6
If necessary, follow the instructions on the card reader to
complete the transaction.
TIP: After you successfully enter your passcode, you can make
payments without a passcode for 24 hours while you continue to
wear your watch. If you remove the watch from your wrist or
disable heart rate monitoring, you must enter the passcode
again before making a payment.
Adding a Card to Your Garmin Pay Wallet
You can add up to 10 credit or debit cards to your Garmin Pay
wallet.
1
From the Garmin Connect app, select or .
2
Select
Garmin Pay
> >
Add Card
.
3
Follow the on-screen instructions.
After the card is added, you can select the card on your watch
when you make a payment.
Managing Your Garmin Pay Cards
You can temporarily suspend or delete a card.
NOTE: In some countries, participating financial institutions may
restrict the Garmin Pay features.
1
From the Garmin Connect app, select or .
2
Select Garmin Pay .
3
Select a card.
4
Select an option:
• To temporarily suspend or unsuspend the card, select
Suspend Card .
The card must be active to make purchases using your
Descent Mk2i device.
• To delete the card, select .
Changing Your Garmin Pay Passcode
You must know your current passcode to change it. If you forget
your passcode, you must reset the Garmin Pay feature for your
Descent Mk2i device, create a new passcode, and reenter your
card information.
1
From the Descent Mk2i device page in the Garmin Connect
app, select Garmin Pay > Change Passcode .
2
Follow the on-screen instructions.
The next time you pay using your Descent Mk2i device, you
must enter the new passcode.
Music
You can download audio content to your device, so you can
listen when your smartphone is not nearby. The Garmin
Connect app and Garmin Express application allow you to
download audio content from a third-party provider or your
computer.
You can use the music controls to control music playback on
your smartphone or to play music stored on your device. To
listen to audio content stored on your device, you must connect
headphones with Bluetooth technology.
Connecting to a Third-Party Provider
Before you can download music or other audio files to your
compatible watch from a supported third-party provider, you
must connect to the provider using the Garmin Connect app.
1
From the Garmin Connect app, select or .
2
Select Garmin Devices , and select your device.
3
Select
Music
.
4
Select an option:
• To connect to an installed provider, select a provider, and
follow the on-screen instructions.
• To connect to a new provider, select Get Music Apps ,
locate a provider, and follow the on-screen instructions.
22 Garmin Pay
ikont.
Garmin Pay jelszó megváltoztatása
A jelszó megváltoztatásához ismernünk kell a jelenlegi jelszavunkat. Ha el-
felejtettük a jelszót, azt többé nem szerezhetjük vissza, ezért törölnünk kell a
pénztárcát, újat kell létrehoznunk, és meg kell adnunk a kártyainformációkat.
A Garmin Pay pénztárcához hozzáférést biztosító jelszót az eszközön tud-
juk megváltoztatni.