1
From the home screen, select the status bar or swipe down
from the top of the page.
The connections page appears.
2
Select
GPS
>
Mark Location
> .
Saving Locations from the Map
1
From the home screen, select
Where To?
> >
A Map
Point
.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select > .
Navigating to a Location
1
From the home screen, select
Where To?
.
2
Select an option:
• Select
Saved
to navigate to a saved course, location, or
segment.
• Select
Recent Finds
to navigate to one of the last 50
locations you have found.
• Select
Search Tools
to navigate to a point of interest or
specific address (requires routable maps), or a city,
intersection, or known coordinates.
• Select to narrow your search area.
3
If necessary, select to enter specific search information.
4
Select a location.
5
Select
RIDE
.
6
Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
1
From the home screen, select
Where To?
>
Search Tools
>
Coordinates
.
2
Enter the coordinates, and select .
3
Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting
point.
1
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select >
Where To?
>
Back to Start
.
4
Select
Along Same Route
or
Most Direct Route
.
5
Select
RIDE
.
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Select anywhere on the screen to view the timer overlay.
2
Scroll to the map.
3
Select > .
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Project Location
.
5
Enter the bearing and distance to the projected location.
6
Select .
Editing Locations
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select .
5
Select an attribute.
For example, select
Change Elevation
to enter a known
altitude for the location.
6
Enter the new information, and select .
Deleting a Location
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Delete Location
> .
Planning and Riding a Route
You can create and ride a custom route. A route is a sequence
of waypoints or locations that leads you to your final destination.
1
From the home screen, select
Where To?
>
Route Planner
>
Add First Location
.
2
Select an option:
• To select a saved location, select
Saved
, and select a
location.
• To select a location for which you recently searched,
select
Recent Finds
, and select a location.
• To select a location on the map, select
Use Map
, and
select a location.
• To browse for and select a point of interest, select
POI
Categories
, and select a nearby point of interest.
• To select a city, select
Cities
, and select a nearby city.
• To select an address, select
Address
, and enter the
address.
• To use coordinates, select
Coordinates
, and enter the
coordinates.
3
Select
Use
.
4
Select
Add Next Location
.
5
Repeat steps 2–4 until you have selected all locations for the
route.
6
Select
View Route
.
The device calculates your route, and a map of the route
appears.
TIP:
You can select to view an elevation plot of the route.
7
Select
RIDE
.
10
Navigation
